Sony MCC-3000MT Instructions For Use Manual page 4

Important EMC notices for use in the medical environments
• The MCC-3000MT needs special precautions regarding EMC and needs to be installed and
put into service according to the EMC information provided in this instructions for use.
• The portable and mobile RF communications equipment such as cellular phones can affect the
MCC-3000MT.
List of cables used for EMC tests
Type of cable
DC power cable
CCMC-T15 camera cable
BNC Cable (5C-FW)
D-Sub 9P Cable (RS232C)
Warning
The use of accessories and cables other than those specified, with the exception of replacement
parts sold by Sony Corporation, may result in increased emissions or decreased immunity of the
MCC-3000MT.
Guidance and manufacturer's declaration - electromagnetic emissions
MCC-3000MT
The
The customer or the user of the
environment.
Emission test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
4
1.5 m, non-shielded
15 m, shielded
1.5 m, shielded
1.5 m, shielded
is intended for use in the electromagnetic environment specified below.
MCC-3000MT
Compliance
Group 1 The
function. Therefore, its RF emissions are very low and
are not likely to cause any interference in nearby
electronic equipment.
Class B The
establishments, including domestic establishments and
those directly connected to the public low-voltage power
supply network that supplies buildings used for domestic
Class A
purposes.
Complies
Specifications
should assure that it is used in such an
Electromagnetic environment-guidance
MCC-3000MT
uses RF energy only for its internal
MCC-3000MT
is suitable for use in all