Manitowoc S Use And Care Manual page 47

Section 4
1. Water Curtain
A. Gently flex the curtain in the center and remove
it from the right side.
B. Slide the left pin out.
STEP 2
Water Curtain Removal
Part Number 80-1620-3
2. Ice Thickness Probe
A. Compress the hinge pin on the top of the ice
thickness probe.
STEP 1
COMPRESS
HINGE PIN TO
REMOVE
SV3153
B. Pivot the ice thickness probe to disengage one
pin then the other. The ice thickness probe can
be cleaned at this point without complete
removal. Follow Step C for complete removal.
Disconnect the electric power to the ice machine at
the electric service switch box.
C. Disconnect the ice thickness control wiring from
the control board.
Ice Thickness Probe Removal
! Warning
Maintenance
SV3135
4-7