Section 2
Self-Contained Electrical Wiring Connections
These diagrams are not intended to show proper
wire routing, wire sizing, disconnects, etc., only the
correct wire connections.
All electrical work, including wire routing and
grounding, must conform to local, state and national
electrical codes.
Though wire nuts are shown in the drawings, the ice
machine field wiring connections may use either
wire nuts or screw terminals.
SELF CONTAINED ICE MACHINE
115/1/60 OR 208-230/1/60
L
1
GROUND
ICE MACHINE
SV1258
CONNECTIONS
For United Kingdom Only
As the colors of the wires in the mains lead of the appliance may not correspond with the colored markings
identifying the terminals in your plug, proceed as follows:
•
The wire which is colored green and yellow must be connected to the terminal in the plug which is marked with
the letter E or by the earth ground symbol
•
The wire colored blue must be connected to the terminal which is marked with the letter N or colored black.
•
The wire colored brown must be connected to the terminal which is marked with the letter L or colored red.
Part Number 80-1620-3
!
Warning
N=115V
OR
L2=208-230V
GROUND
TO SEPARATE
FUSE/BREAKER
SELF CONTAINED ICE MACHINE
208-230/3/60
SV1190
L
1
SELF CONTAINED ICE MACHINE
230/1/50
GROUND
SV1191
or colored green or green and yellow.
Installation Instructions
L
1
L
2
L
3
GROUND
ICE MACHINE
FUSE/BREAKER
CONNECTIONS
L
1
N
ICE MACHINE
CONNECTIONS
L
1
L
2
L
3
GROUND
TO SEPARATE
L
1
N
GROUND
TO SEPARATE
FUSE/BREAKER.
DISCONNECT ALL
POLES.
2-11