Shallow Water Operation - TOHATSU MFS 6A3Z Owner's Manual

52
ENGINE OPERATION
ENOM00068-A

9. Shallow water operation

ENOW00051-0
During shallow water operation, be careful
not to place your hand between the swivel
bracket and the clamp bracket. Be sure to
tilt the outboard motor down slowly.
ENOW00053-0
While in shallow water drive position, do
not operate the outboard motor in Reverse.
Operate the outboard motor at slow speed
and keep the cooling water intake sub-
merged.
ENOW00054-A
7
Do not overtilt outboard motor when driv-
ing shallow water, or air may be sucked
through water inlet, potentially leading to
engine overheating.
1. Water inlet
WARNING
CAUTION
CAUTION
1
ENOF01144-A
Manual tilt type (MF, EF type)
Shallow water running position:
1. With the shift lever in Neutral or For-
ward, tilt the motor up slowly by about
40° and then lower the tilt lever for set-
ting at the shallow water running posi-
tion.
Return to normal running position:
2. Tilt the motor up fully and then return
the motor down slowly to the normal
running position.
2
1. Tilt lever
2. Shallow water running position
1
ENOF00549-0