6.5
Ceiling Mount Installation
1.
To prevent damage to your projector, please use ceiling mount (140-120104-01).
2.
If you want to use a third-party ceiling mount kit, ensure the screws used to attach a
mount to the projector meet the following specifications:
y
Screw type: M4*4
y
Minimum screw length: 10mm
NOTE:
Damage resulting from incorrect installation will void the warranty.
WARNING
•
If you buy a ceiling mount from another company, be sure to use the correct screw size. Screw size will
vary depending on the thickness of the mounting plate.
•
Be sure to keep at least 10 cm gap between the ceiling and the bottom of the projector.
•
Avoid installing the projector near a heat source.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-01 Rev. 1 (07-2015)
Section 6: APPENDICES
63