Section 4: USeR CoNTRolS
4.2.8
3D
•
Auto: When a HDMI 1.4a 3D timing identification signal is detected, the 3D
image is selected automatically.
•
Choose "On" to enable 3D function.
•
Choose "Off" to disable 3D function.
3D Invert
If you see a discrete or overlapping image while wearing DLP 3D glasses, you
may need to execute "Invert" to get best match of left/right image sequence to
get the correct image.
3D Format
Use this feature to select the 3D format. Options are: "Frame Packing", "Side-
by-Side (Half)", "Top and Bottom", "Frame Sequential", and "Field Sequential".
1080p@24
Use this feature to select 96 or 144Hz refresh rate as using 3D glasses in
the1080p @ 24 frame packing.
NOTE:
"Frame Sequential" is supported the DLP Link 3D input signals from VGA/HDMI connector.
"Frame Sequential"/"Field Sequential" are supported the HQFS 3D input signals from Video connector.
"Frame Packing"/"Side by Side(Half)" / "Top and Bottom" are supported from HDMI 1.4a 3D input signals.
36
3D
3d
3D
Auto
3D Invert
Off
3D Format
1080@24
Select
Enter
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
Back
020-000816-01 Rev. 1 (07-2015)