VBA10401-R.3623.A
Procedure
1. Take out 3 screws (#642).
2. Remove the screw (#661), spring (#214) and lever (#254).
3. Lock the mirror-up lever (#203) with the preview locking lever (#222).
4. When the aperture lever is pressed down with finger, the aperture coupling lever (#207) moves in the
direction of arrow ( ① ).
5. In state of 4 . , remove the aperture control unit (#B241) by pulling it in the direction indicated by
arrow ( ② ) while letting the arm (#B241) escape.
Lock #203 with this lever.
#222
#203
#B241
Arrow ②
Arrow ①
#207
Arm of #B241
- D19 ・
-