Nikon D70 VBA10401 Repair Manual page 63

Solder Shield wires
Tape (#709)
SB upper case
・ Attach the SB uper case on the SB lower case. （ Fig.1 ）
・ By pushing the pop-up lever A part of the top cover unit, activate pop-up of the built-in SB.
・ Confirm that the hooking lever of the SB upper case is hooked to 2 holes. （ Fig.2 ）
・ Attach 2 screws (#631).
SB upper case
#631×2
Position for attaching #304
#304×2
SB lower case unit
Fig.1
- Ａ32 ･
Red: Lighting unit control PCB
White: Lighting unit control PCB
Fiber optics
Note）Both ends of the fi-
ber optics are just pinched
in individual parts, and not
adhered.
#304×2
Pop-up lever A part
-
VBA10401-R.3623.A
Hooking lever
Fig.2