・ Attach the TFT-PCB connection FPC to the connector.
Bottom cover
∞ Infinity alignment & adjustment
・ Replace the finder screen with the infinity focus check screen (J15410), and use the reference lens (J18010)
and read the value. In case it is out of standard, increase or decrease washers (#297A or#297B) for
adjustments.
"0" position
J18010
TFT-PCB connection FPC
#692
Standard: ±0.07mm(1 scale = 0.01mm)
Value of J18010
+0.07 ~ -0.07
+0.08 ~ +0.15
-0.08 ~ -0.15
+0.15 or more; -0.15 or less
Reference
line
- A43 ・
#697
#677×6
Adjustment
Adjustment unnecessary if within standard
Decrease washers (#297) (for thinning)
Increase washers (#297) (for thickening)
Check if Front body or Penta box is not
deformed.
-
VBA10401-R.3623.A
After the bottom cover is attached,
store the I/F cover.