How To Connect Communications Tool (J61205) - Nikon D70 VBA10401 Repair Manual

How to connect communications tool (J61205)

① Connect the communications tool (J61205) to MC-31 (J19109).
② Attach the communications tool temporarily to
the body A with the screw (6K010-049) which
is included in package.
③ Loosen the screw (6K010-049 ) and screw it
lightly again at the position where the shaft
C of the body can enter in the hole B of the
communications tool.
Note: Do NOT tighten screw completely.
④ Pinch the contact part of the connection FPC with
the communications tool to make a connection.
- Ａ36 ･ -
VBA10401-R.3623.A
J61205
J19109
Connection
FPC