Detaching And Refitting The Paper Feeder Paper Conveying Unit Assembly; Detaching And Refitting Paper Feeder Paper Feed Rollers 1 And 2 - Kyocera PF-750 Service Manual

(2) Detaching and refitting the paper feeder paper conveying unit assembly

Replace the desk upper or lower paper width switches as follows.
Procedure
1. Open the cassette.
2. Remove left cover 3.
3. Remove two screws holding the paper
feeder paper conveying unit assembly and
then the assembly.

(3) Detaching and refitting paper feeder paper feed rollers 1 and 2

Clean or replace paper feed roller 1, 2 as follows.
Procedure
1. Turn the paper feeder paper conveying unit
over.
2. Remove the stop ring while lifting the paper
feed roller section.
3. Pull out the shifting shaft and then paper
feeder paper feed rollers 1 and 2.
4. Clean or replace paper feeder paper feed
rollers 1 and 2.
5. Refit all removed parts.
Paper feeder
paper conveying
unit assembly
Screw
Shifting shaft
Paper feeder
paper feed roller 2
Screw
Figure 1-5-2
Figure 1-5-3
5H0
Paper feeder
paper feed roller 1
Stop rings
1-5-3