Paper Feed Section; Detaching And Refitting The Paper Feed Assembly (Paper Feed Roller And Pickup Roller) - Kyocera FS-3040MFP+ Service Manual

1-5-3 Paper feed section

(1) Detaching and refitting the paper feed assembly (paper feed roller and pickup
roller)
Procedure
1. Remove the cassette.
2. While pushing the lock and then slide
the paper feed roller pin.
3. While pressing the lever and then
remove the paper feed assembly.
4. Check or replace the paper feed
assembly and refit all the removed
parts.
NOTE:
When the periodic maintenance
(replacing the maintenance kit, see
page 2-4-4), perform maintenance
mode.:
U251 Clearing the maintenance count
(see page 1-3-26)
Cassette
Lock
Paper feed roller pin
(Paper feed roller)
(Pickup
Spring
1-5-6
Paper feed assembly
roller)
Lever
Figure 1-5-7
2MF/2MG