Kyocera PF-750 Service Manual page 30

5H0-2
Monochrome machine
Section Jam code
Paper 12
feed No paper feed from cas-
section sette 3
15
Jam in paper feeder hori-
zontal paper conveying
section 1
16
Jam in paper feeder hori-
zontal paper conveying
section 2
17
Jam in paper feeder hori-
zontal paper conveying
section 3
21
Multiple sheets in paper
feed section
09
3000-sheet paper feeder
sequence error jam
1-4-2
Feed switch 3 (FSW3) does not turn on within the specified
time of paper feeder paper feed clutch 1 (PFPFCL1) turning
on; the clutch is then successively turned off for 1 s and turned
back on, but the switch again fails to turn on within the speci-
fied time.
Paper path sensor 3 (PPSENS3) does not turn on within spec-
ified time of paper feeder paper feed clutch 2 (PFPFCL2) turn-
ing on.
Paper path sensor 2 (PPSENS2) does not turn on within spec-
ified time of the paper path sensor 3 (PPSENS3) turning on.
Paper path sensor 1 (PPSENS1) does not turn on within spec-
ified time of the paper path sensor 2 (PPSENS2) turning on.
The feed switch 3 (FSW3) does not turn off within specified
time of its turning on.
Sequence error is occurred between the machine and paper
feeder.
Conditions Specified
time
2044 ms
(30 ppm)/
1582 ms
(40/50 ppm)
823 ms
(30 ppm)/
637 ms
(40/50 ppm)
879 ms
(30 ppm)/
681 ms
(40/50 ppm)
539 ms
(30 ppm)/
417 ms
(40/50 ppm)
Paper length
+ 1595ms
(30 ppm)/
Paper length
+ 1234ms
(40/50 ppm)
-