5H0-4
8. Insert the cassette heater connectors into
the relay wire connectors.
9. Insert the main harness connector into the
relay wire connector.
10. Tidy up the cassette heater cable and relay
wire using eight wire saddles and route the
cable and wire while clipping the wire sad-
dles into the holes in the rear frame.
11. Refit the paper feeder rear cover.
12. Refit the right cover and left cover 3.
1-2-4
Wire saddle
Wire saddles
Wire saddles
Relay wire
Figure 1-2-4
Wire saddles