Kyocera PF-750 Service Manual page 28

5H0-4
Maintenance
item No.
Setting the paper size for the paper feeder
U208
Description
Sets the size of paper used in optional 3000-sheet paper feeder.
Purpose
To change the setting when the size of paper used in the paper feeder is changed.
Setting
1. Press the start key.
2. Select the paper size (A4, B5 or Letter).
Initial setting: Letter (Inch specifications)/A4 (Metric specifications)
3. Press the start key. The setting is set.
4. Turn the main power switch off and on.
Setting the paper feed device
U247
Description
Turns on motors and clutches of 3000-sheet paper feeder.
Purpose
To check the operation of motors and clutches of paper feed device.
Method
1. Press the start key.r
Display
LCF FEED
CLUTCH B
CLUTCH P1
CLUTCH P2
2. Select the item to be operated.
3. Press the start key. The operation starts.
4. To stop operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Checking/clearing copy counts by paper feed locations
U901
Description
Displays or clears copy counts by paper feed locations.
Purpose
To check the time to replace consumable parts. Also to clear the counts after replacing the consumable parts.
Method
Press the start key. The counts by paper feed locations are displayed.
Display
MP TRAY
CASSETTE 1
CASSETTE 2
CASSETTE 3
CASSETTE 4
LCF
DUPLEX
When an optional paper feed device is not installed, the corresponding count is not displayed.
Clearing
1. Select the count to be cleared.
To clear all counts, press the clear key.
2. Press the start key. The count is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-8
Description
Motor and clutches
Paper feeder conveying motor (PFCM)
Paper feeder conveying clutch (PFCCL)
Paper feeder paper feed clutch 1 (PFPFCL1)
Paper feeder paper feed clutch 2 (PFPFCL2)
Paper feed locations
MP tray
Cassette 1
Cassette 2
Optional cassette 3
Optional cassette 4
3000-sheet paper feeder
Duplex section