Kyocera PF-750 Service Manual page 27

Maintenance
item No.
Adjustment: center line adjustment
U034
1. Select the item to be adjusted.
Display
LEFT
MP TRAY
CASSETTE 1
CASSETTE 2
CASSETTE 3
CASSETTE 4
DUPLEX
*: Setting the difference value from reference value
2. Press the system menu key.
3. Press the start key to output a test pattern.
4. Press the system menu key.
5. Change the setting value using the +/- or numeric keys.
For output example 1, decrease the value. For output example 2, increase the value.
6. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in
maintenance mode.
U034
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Adjustment of reference value
Paper feed from MP tray*
Paper feed from cassette 1*
Paper feed from cassette 2*
Paper feed from optional cassette 3*
Paper feed from optional cassette 4*
Duplex mode (second)*
Center line of printing
Correct image
U067
(See the service manual
for the machine.)
Description
Setting
range
0 to 1000
-500 to 500
-500 to 500
-500 to 500
-500 to 500
-500 to 500
-500 to 500
Output Output
example 1 example 2
Figure 1-3-4
U072
(See the service manual
for the machine.)
5H0-4
Initial Change in
setting value per step
490 1.0 mm
0 1.0 mm
0 1.0 mm
0 1.0 mm
0 1.0 mm
0 1.0 mm
0 1.0 mm
1-3-7