Basic Operation - KERN ALJ 160-4A Operating Manual

8 Basic Operation

Start-up
Switching Off
Simple weighing
Taring
ALJ/ALS/PLJ/PLS-BA-e-1135
In stand-by mode (see chap. 6.5) press ON/OFF button.
The balance is ready for weighing when the weight display
appears.
Press ON/OFF button, the balance returns to the stand-by
mode (see chap. 6.5).
 Place goods to be weighed on balance
 Wait until the stability display appears []
 Read weighing result.
 Place the weighing box and press the TARE button.
„0-t" is displayed.
 After standstill control the zero display appears.
The weight of the container is now internally saved.
 Weigh the material, the net weight will be indicated.
The weight of the weighing container will be displayed as a
minus number after removing the weighing container.
The tare weight is saved until it is deleted. Remove the load
from the balance and press the TARE button. „0-t" is
displayed, wait until the zero display appears.
The tare procedure can be repeated as many times as
necessary, for example with initial weighing of several
components for a mix (add-on weighing). The limit is
reached when the total weighing range capacity is full.
.
31