11.6 Remote control instructions
Instruction:
"T" = H54
"C" = H43
"E" = H45
"M" = H4D
"O" = H4F
11.7 Printer mode
The following conditions must be met to provide successful communication between
the weighing balance and the printer.
• Use a suitable cable to connect the weighing balance to the interface of the
printer. Faultless operation requires an adequate KERN interface cable.
• The Baud rates of balance and printer must agree, see chap. 9.3.
ALJ/ALS/PLJ/PLS-BA-e-1135
Function
Taring
Adjustment
Enter
Menu
ON/OFF
69