Cobranet Output Settings; Figure 34: Cobranet Output Settings - D&R Lyra User Manual

Webpage
Source Selection
Professional/Consumer
Copybit
Original
Note: Copybit and Original bit setting are only effective when signal is set to consumer-mode.

11.9 Cobranet Output Settings

If Cobranet is not installed "Cobranet output settings" menu is not visible.
Each bundle pair represents a stereo audio-signal and can be renamed for specific purposes. Just like the
normal Output Settings there are also three options per bundle pair available.
Conference Talkback, Studio Mute and CRM Mute. These three options are already discussed in chapter
11.8.
The Advanced Cobranet Settings menu is already discussed in chapter 11.8.1.
Note: The bit setting for Cobranet are grayed out for now.
Lyra Digital Mixer from D&R Phone +31 294 418014, email:
You can select what kind of routing you want to the output. You
can select any of the inputs to be directly routed to an output. You
can also select a buss to be routed to an output. You can select
PROG,SUB, AUX, CUE and CRM at -20dBFS. For the digital outputs
you can choose the buss at –20dBFS or at the user-setup digital-
headroom level at the Global Settings of the Lyra.
You can set this bit to determine if the digital signal is professional or
consumer.
With this bit set you give the signal the 'Copy' marking.
With this bit set you give the signal the 'Original' marking.

Figure 34: Cobranet Output Settings

info@d-r.nl Page 47