System Setting Menu; Movement Control - ESP PTZ10EXT User Manual

System Setting Menu

Camera

Movement Control

Preset
Patrol Track
Pattern
Remove
Exit
CAMERA
Screen Tips
Auto ICR
Auto Focus
Focus Speed
Digital Zoom
Zoom Speed
MOVEMENT CONTROL
Auto Flip
Proportion Pan
Park Time
Park Action
Power Action
Control Speed
AB Scan Setting
AB Scan Path
AB Scan Speed
Limit Stop
Limit Setting
The North Setting
10
Options for OSD screen tips, focus and zoom functions
Options for movement speed, orientation, scanning and
movement limits
Configure preset positions
Configure patrol tracks
Configure patrol patterns
Remove presets, patrols or patterns
Leave OSD menu
Enable or disable screen tips and on-screen information
Enable high light level compensation – helps reduce glare from
bright light sources e.g. car headlight and floodlight
Enable or disable the AF feature. Focus will be entirely manually
controlled, only recommended for troubleshooting
Configuration of AF speed – high/med/low
Enable digital zoom feature (not available)
Zoom speed setting – fast/slow
Enable/disable auto flip (camera turns 180° when following a
subject passing underneath the camera, to aid tracking)
Enable/disable proportion pan (camera control speed is lowered
when zoomed in to aid tracking)
Set park time (idle time) in seconds (0-255)
Set park action when camera is idle (Preset/Pattern/Patrol/Scan)
Set power action when camera is powered up
(Preset/Pattern/Patrol/Scan)
Set camera control speed (High/Medium/Low)
Setup points A and B for AB Scan
Set AB scan path (I-Arc/O-Arc)
I-Arc= front facing, O-Arc= rear facing
Set AB scan speed (High/Medium/Low)
Enable/disable limit stop option. Overrides the auto flip function
when enabled.
Set limit setting parameters – defines the area that the camera may
cover
Set orientation north position (for correct OSD directional information)