Aligning The Print Head - Epson Stylus Pro 3880 User Manual

Maintaining and Transporting the Printer | 93

Aligning the Print Head

Aligning the print head is the most important thing you can do to ensure the
best print quality. If banding appears on your prints, if they look grainy or
blurry, or you see misregistration or "ghosting," you need to align the print
head.
Although you can align the print head using the printer utility software, it's
best to align from the printer's control panel. This will do the most thorough
job in the shortest time, and it's all automatic.
If you haven't already done so, it's a good idea to run a nozzle check before
aligning the print head (see page 90). This ensures that the print head
alignment patterns print correctly.
Follow these steps to align the print head using the control panel:
1. Make sure the printer is turned on. Then load one of the following types
of paper:
Epson Premium Glossy Photo Paper
•
Epson Premium Photo Paper Glossy
•
Epson Premium Luster Photo Paper
•
Epson Ultra Premium Photo Paper Luster
•
Enhanced Matte Paper
•
Epson Ultra Presentation Paper Matte
•
Epson Presentation Paper Matte
•
2. Press the r button.
Menu
3. Press d until
HEAD ALIGNMENT
4. Make sure is highlighted and then press r.
Auto
5-93
is highlighted. Then press r.