Download Print this page

Advertisement

®
Epson Stylus
Pro 3880

Network Guide

Advertisement

   Also See for Epson Stylus Pro 3880

   Related Manuals for Epson Stylus Pro 3880

   Summary of Contents for Epson Stylus Pro 3880

  • Page 1: Network Guide

    ® Epson Stylus Pro 3880 Network Guide...

  • Page 2: Copyright And Trademarks

    Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein.

  • Page 3

    “Pocket UnZip,” “Pocket Zip,” and “MacZip” for its own source and binary releases. Trademarks Epson and Epson Stylus are registered trademarks, and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners.

  • Page 4: Table Of Contents

    Contents Chapter 1 Introduction About Your Printer ............6 About This Guide .

  • Page 5

    EpsonNet Config for Mac OS X ......... . . 27 About EpsonNet Config .

  • Page 6: Chapter 1 Introduction

    Chapter 1 Introduction About Your Printer Your printer has a built-in Ethernet interface and can connect anywhere on your network using 10Base-T or 100Base-TX. The built-in Ethernet interface automatically selects the correct link speed and network protocols when it connects to the network. The network interface supports multiple protocols and automatically detects ®...

  • Page 7: Warnings, Cautions, And Notes

    Note: ❏ This guide is written for network administrators, and many of the steps included in this guide require detailed network knowledge and administrator rights. ❏ The term “network administrator” in this guide refers to the person responsible for maintaining the network. “Administrator” is synonymous with “Supervisor.” ❏...

  • Page 8: Features Of The Network Interface

    Features of the Network Interface ❏ Connects your Epson printer using a built-in Ethernet interface, which is called the network interface in this manual, to the network. ❏ Supports multiple protocols, such as TCP/IP and Bonjour. ❏ Supports both 10Base-T and 100Base-TX.

  • Page 9: Network Interface Operation

    Network Interface Operation Status lights The status lights provide you with important information on the operation of the network interface. Flashes when data is Indicates connection type Indicates connection Flashes when data transmitted or received type is received RJ-45 connector RJ-45 connector The light on the left indicates whether the network interface is connected to a 10Base-T (green) or 100Base-TX (orange) network.

  • Page 10: About The Software

    About the Software The software CD provided with your printer includes the following network software. ❏ EpsonNet Config for Windows is a Windows-based configuration utility that allows you to configure the network interface. See “EpsonNet Config for Windows” on page 26. ❏...

  • Page 11: Chapter 2 Setting Up Your System For Network Printing

    Chapter 2 Setting Up Your System for Network Printing Overview This section describes the general procedure on how to set up the network interface. 1. Check the network interface operation. Check the functions and operations of the network interface, such as the status lights.

  • Page 12: Installing Network Components On Your Computer

    Installing Network Components on Your Computer Before configuring the network interface and printing from the computer, you need to install the necessary network components (such as TCP/IP) and assign an IP address and subnet mask for your computer, depending on the printing method you want to use.

  • Page 13

    3. Check if the following network components are in the list. If they are already installed, go to “Connecting the Network Interface to the Network” on page 16. The following table lists the network components required for configuring the network interface with EpsonNet Config. EpsonNet Config’s setting screens Necessary components TCP/IP, SNMP (IP trap)

  • Page 14: Windows Xp

    The necessary components are now installed. Go to the section “Connecting the Network Interface to the Network” on page 16. Windows XP For Windows XP, use the following procedure to install the necessary components. Note: The Windows XP CD may be required during the installation. 1.

  • Page 15: Mac Os X

    The following table lists the components required for network printing. Printing method Necessary components LPR printing Internet Protocol (TCP/IP) 4. If the necessary components are not in the list, click Install to install them. 5. For LPR printing: Double-click Internet Protocol (TCP/IP) on the Local Area Connection Properties dialog box to open the Internet Protocols (TCP/IP) Properties dialog box.

  • Page 16: Setting Up The Network Interface

    Setting Up the Network Interface Connecting the Network Interface to the Network Follow the instructions below to connect the network interface to the network. 1. Make sure that your printer is turned off. 2. Connect one end of the network cable to the RJ-45 connector on the network interface, and the other end to the network.

  • Page 17

    Item Parameter IP ADDRESS SETTING AUTO, PANEL, PING APPLE TALK ON, OFF MS NETWORK ON, OFF IP,SM,DG SETTING IP ADDRESS 000.000.000.000 to 255.255.255.255 (default setting is 192.168.192.168) SUBNET MASK 000.000.000.000 to 255.255.255.255 (default setting is 255.255.255.000) DEFAULT GATEWAY 000.000.000.000 to 255.255.255.255 (default setting is 255.255.255.255) BONJOUR ON, OFF...

  • Page 18

    7. Press r, then press u or d to choose one of the following IP configuration settings: ❏ Choose AUTO if your network uses a DHCP server to provide IP addresses automatically. The printer’s IP address will be obtained from the DHCP server whenever the printer is reset or turned on, but may change as IP addresses are reassigned over time.

  • Page 19: Printing A Network Status Sheet

    12. Press u or d to change each octet value, then press r to select the next octet. When you have changed the value of the last octet, press r. The LCD displays the default gateway. 13. Press u or d to change each octet value, then press r to select the next octet.

  • Page 20: Installing The Printer Software

    Installing the Printer Software To print to the network printer, you need to install the printer driver (printer software) on your computer. See the appropriate section below for your operating system. Windows 1. Insert the printer software CD in your CD or DVD drive. 2.

  • Page 21: Mac Os X

    4. When you see a screen like this one, click the Manual button. 5. Select LPT1: as the printer port, then click OK. 6. Follow the on-screen instructions to install all necessary software and manuals and register your printer. 7. When you’re done, click Exit and eject the CD. Restart your computer if prompted.

  • Page 22

    3. Double-click the Epson Stylus Pro 3880 icon. 4. Follow the on-screen instructions to install all necessary software and register your printer. 5. Double-click the User’s Guide icon to place links to the User’s Guide and this Network Guide on your desktop.

  • Page 23: Adding The Network Port

    , click Control Panel, and then click View Devices and Printers (Windows 7), Printer or Printers (Windows Vista), or Printers and Faxes (Windows XP). 2. Right-click the Epson Stylus Pro 3880 and select Printer Properties or Properties. 3. Click the Ports tab, then click Add Port.

  • Page 24: Mac Os X

    1. Open System Preferences. 2. Open Print & Scan or Print & Fax. 3. Click the + button to add a new printer. 4. Select the EPSON TCP/IP printer model. 5. Click Add. You can now use the printer on your network.

  • Page 25

    Bonjour Printing 1. Open System Preferences. 2. Open Print & Scan or Print & Fax. 3. Click the + button to add a new printer. 4. Select the printer model that is connected with Bonjour. 5. Click Add. You can now use the printer on your network. Setting Up Your System for Network Printing...

  • Page 26: Chapter 3 Network Software

    Chapter 3 Network Software This chapter explains how to use the network software provided with your printer. EpsonNet Config for Windows About EpsonNet Config EpsonNet Config allows administrators to configure the network interface. Note: Be sure to use EpsonNet Config included on the software CD shipped with your printer.

  • Page 27: Epsonnet Config For Mac Os X

    EpsonNet Config for Mac OS X About EpsonNet Config EpsonNet Config allows administrators to configure the network interface. Note: Be sure to use EpsonNet Config included on the software CD shipped with your printer. Accessing the EpsonNet Config User’s Guide The EpsonNet Config User’s Guide contains detailed information on EpsonNet Config.

  • Page 28

    Supported Web Browsers The following web browsers are supported: ® ❏ Microsoft Internet Explorer version 5.0 or later ❏ Netscape Navigator version 7.0 or later ❏ Firefox version 2.0 or later About Web Browser Settings When running EpsonNet Config with Web Browser, do not use a proxy server to access the Internet.

  • Page 29: Configuring The Network Interface Using Epsonnet Config With A Web Browser

    Configuring the Network Interface Using EpsonNet Config with a Web Browser After you have assigned an IP address to the network interface using the printer’s control panel, EpsonNet Config, or a DHCP server, you can configure the network interface using EpsonNet Config with Web Browser. Note: ❏...

  • Page 30

    ❏ When Auto is selected, DHCP becomes available. A DHCP server/router must be available on your network. ❏ If Set Using Automatic Private IP Addressing (APIPA) is enabled, a private IP address is automatically assigned to the network interface even when there are no DHCP servers on your network.

  • Page 31

    If you want to register the host name and the domain name directly to the DNS server, select Enable for Register Network Interface Address Directly to DNS Server. 11. Select Enable or Disable for Use Universal Plug and Play. Select Enable if you want to use the Universal Plug and Play function.

  • Page 32: Opening Screen

    Opening Screen Any user can access Epson NetConfig with Web Browser by typing the IP address of the network interface for the URL in your browser. Top Menu Bar Home Links to the opening screen. Favorite Links to a Web site previously defined by the administrator.

  • Page 33

    Configuration - Optional Administrator Type the name of the administrator and a link to a favorite Web site. Reset Resets the printer and returns to the default settings. Password Set the password to protect settings. Network Software...

  • Page 34: Chapter 4 Troubleshooting

    Chapter 4 Troubleshooting General Problems Cannot configure the network interface or cannot print from the network. Cause What to do The printer settings or network First, check to see if you can print a status sheet, settings may be wrong. as described in “Printing a Network Status Sheet”...

  • Page 35

    The message “Could not complete communicating configuration data” appears when you send settings to the network interface. Cause What to do This may happen when using a Run Command Prompt from the computer on dial-up router. which EpsonNet Config is installed, and then enter the following command: Format: >ROUTE_ADD_the IP address of the network interface_ the IP address of the...

  • Page 36: Chapter 5 Uninstalling Software

    Chapter 5 Uninstalling Software Follow the steps below to uninstall the network software. Windows 7 and Windows Vista 1. Click , click Control Panel, and then click Uninstall a program. 2. Select the utility you want to uninstall, and then click the Uninstall or Uninstall/Change button.

  • Page 37

    Index IP address control panel, 16 to 19 Adding printer EpsonNet Config with Web Browser, Mac OS X, 24 to 25 29 to 31 Automatic Private IP Addressing (APIPA), Lights, status, 9 Bonjour printing, 25 Mac OS X adding printer, 24 to 25 Cable, network, 9 Bonjour printing, 25 Configuring network interface...

  • Page 38

    Problems, solving, 34 to 35 Protocols, 7 Resetting network interface, 33 RJ-45 connector, Network connector, 9 Router, 30 Setting the IP address, 29 Software, uninstalling, 36 Status lights, 9 Status sheet, printing, 19 Subnet mask, 18, 30 TCP/IP, 29 definition, 10 setting up in Windows, 12 to 15 setting up on Mac OS X, 15, 24 Troubleshooting, 34 to 35...

Comments to this Manuals

Symbols: 0
Latest comments: