Note: You must use at
×
least a 10
eye loupe to
check the pattern.
Maintaining and Transporting the Printer | 91
3. Click the
Nozzle Check
4. Click
to print the nozzle check pattern so you can see if the print
Print
head needs to be cleaned. Or click
check and have the printer automatically clean the print head if
necessary.
5. Examine the nozzle check pattern to make sure it has no gaps or lines.
If the printout looks okay as shown below, you're done. Click
•
.
Finish
If you see any gaps as shown below, click
•
head and follow the on-screen instructions.
6. If the nozzles do not clear after a few cleaning cycles, run a Power
Cleaning Cycle, as described in the next section.
5-91
icon.
if you want to run the nozzle
Auto
Clean
to clean the print