Choosing Paper Configuration Options - Epson Stylus Pro 3880 User Manual

74 | Printing with Epson Drivers for Windows
Note: You may need to
change the Color Density
setting if your custom
profile was created to
optimize D-max and color
gamut.
3. Click
Reduce/Enlarge
select
Fit to Page
list. Or select
Paper
image.
4. If you are enlarging your image beyond the limits of your application
program, click
Optimize Enlargement
image size up to 400% and decrease the output resolution to stay within
the pixel limitations.
Depending on the resolution of your original image and the print size,
you may see reduced quality in the print.

Choosing Paper Configuration Options

1. If you are using non-Epson media and you need to fine-tune its
performance, select the
You see a window like this one:
2. Select the correct settings to match your ICC profile. These settings
override any paper configuration settings you may have made using the
printer's control panel.
• Color Density
when you turn off color management in your printer software).
• Drying Time per Print Head Pass
media and avoid smearing the ink. You can make the print head
wait up to 5 seconds after each pass to allow ink to dry on the page.
4-74
to have the driver resize your image. You can
and select the paper size you loaded in the
and enter a percentage to scale your
Custom
. The driver will increase the
tab and click the
Main
lets you control the ink saturation level (for example,
Output
button.
Paper Config
lets you print with non-Epson