Epson Stylus Pro 3880 User Manual page 126

126 | Solving Problems
Problem
Nothing prints.
Solution
◗ Turn off the printer and computer. Make sure the interface cable is securely
plugged in. Then restart the printer and computer.
◗ Make sure the interface cable meets the required specifications. See page 10 or 11.
◗ Your Epson printer is not selected as the default printer. Install the printer driver if it
is not installed yet, and follow the instructions below to select your Epson printer as
the default printer.
Windows 7 and Windows Vista: Click
Right-click EPSON Stylus Pro 3880 and select Set As Default. Then close the
window.
Windows XP: Click Start, Control Panel, Printers and Other Hardware, and then
click Printers and Faxes. Right-click EPSON Stylus Pro 3880 and select Set As
Default Printer. Then close the window.
Macintosh: Make sure the Stylus Pro 3880 printer driver is correctly added to the
Printer Setup Utility.
◗ The printer port setting doesn't match the printer connection port (Windows).
Windows 7 and Windows Vista: Click
Right-click EPSON Stylus Pro 3880 and select Properties. Click the Ports tab and
make sure your printer port is selected.
Windows XP: Click Start, Control Panel, Printers and Other Hardware, Printers
and Faxes. Right-click EPSON Stylus Pro 3880, and select Properties. Click the
Ports tab and make sure your printer port is selected.
◗ Follow the instructions beginning on page 109 to uninstall your printer software.
Then locate your printer software CD-ROM and reinstall the software. You can also
download and install the latest driver for Macintosh or Windows from the Epson
website at epson.com/support.
,
Control Panel, and then click Printers.
,
Control Panel, and then click Printers.
6-126