Choosing Paper Configuration Options - Epson Stylus Pro 3880 User Manual

Note: You may need to
change the Color Density
setting if your custom
profile was created to
optimize D-max and color
gamut.
Printing with Epson Drivers for Windows

Choosing Paper Configuration Options

1. If you are using non-Epson media and you need to fine-tune its
performance, click the
You see a window like this one:
2. Select the correct settings to match your ICC profile. These settings
override any paper configuration settings you may have made using the
printer's control panel.
• Color Density
when you turn off color management in your printer software).
• Drying Time per Print Head Pass
media and avoid smearing the ink. You can make the print head
wait up to 5 seconds after each pass to allow ink to dry on the page.
• Paper Feed Adjustment
value if you see white lines on your prints, or a higher value if you
see dark lines.
• Paper Thickness
sharper image when printing on unusually thick or thin paper.
lets you fine-tune the setting for unusually thick or thin
• Platen Gap
paper.
When you're finished selecting Paper Configuration settings, click
4-87
button.
Paper Config
lets you control the ink saturation level (for example,
lets you print with non-Epson
helps reduce banding. Choose a lower
helps reduce vertical banding and creates a
| 87
.
OK