Related Manuals for UFO Black Line
Summary of Contents for UFO Black Line
- Page 1 ufotr.com...
- Page 2 Make sure that the main electricity circuit is 220-240V and 50-60Hz and the connection is fused. Check the safety of the network. The fuse must be 16 A. Do not use your UFO heater together with another appliance plugged to the same multiple sockets or connected to the same fuse.
- Page 3 In general, the higher the digit is, the more protection provided to the product. UFO Black Line heaters have IP certificate. IP34 refers that they provide protection against large objects (hand tool) with diameter over 2.5 mm and against water spilling from any direction.
-
Page 4: Installation
Fig 5-a and Fig. 5-b (P.I) NOTE: In case of vertical installation, be sure that LED screen on your Black Line heater is downwards. Otherwise it will give an error signal 'Er' and will not work. - Page 5 2- Pull out the batteries in case of long terms of disuse to prevent leakage which may impair your remote control. The screen of the remote control starts functioning after inserting the batteries. UFO logo and flashing clock indicator starts appearing on the screen.
-
Page 6: Manual Operation
7. Cleaning and Maintenance Instructions Maintenance Attention! Careful and regular maintenance of UFO Infrared Heater considering our instructions assume great importance so as to attain a long and efficient operation of your appliance. 1- Check the filthiness of the Reflector and IR – Filament at least once a month. If necessary, apply cleaning and maintenance instructions. - Page 7 - dirt remover solution which will not cause scratches can be used. After the cleaning, it should be dried with a soft cloth without leaving a trace. 3- If it is possible, clean the reflector and the filament with dry air externaly. If not, please consult to an UFO technical service or to experts authorized by UFO.
-
Page 8: Terms Of Warranty
9. Terms of Warranty Warranty by UFO does not cover the defects arising out of the improper use the appliance. The warranty does not cover the situations below: 1- The damages and defects arising out of improper use. 2- The damages and defects having occurred during the transportation after the delivery of the product to the customer by the company.