Advertisement
6. Operating Instuctions
6.1 Definitions of the Buttons on the Remote Control
The functions of your heater may be controlled via the buttons on your remote control and LCD screen. You may also control
some of the functions of your heater through the buttons on the front side of the heater.
Remote Control
1.
On / Off
Switches on or off the heater or stands it by.
+-
/(Program Up / Down)
2.
Adjusts program settings..
3. Clock
Sets the time.
4. Timer On
Switches on the heater when it is in stand by mode.
5. Timer Off
Switches off the heater to stanby mode at a preset time.
Warning! Insert the batteries of your remote control
V)
See Fig. 13-14 (P.
6.2 Definition and Functions of the Indicators on the Remote Control
V)
See Table 4 (P.
6.3 Operation of the Remote Control
Inserting Batteries
Insert 2 AAA/ Alkaline type batteries into your Remote Control.
1- Flip the backside of your remote control and pull out battery cover. Insert the batteries in accordance with the instructions
and polarity of the batteries.
2- Change the batteries in the same way depicted above.
NOTICE:
1- Replace the old batteries with the same type batteries. Otherwise, your heater may not function well.
2- Pull out the batteries in case of long terms of disuse to prevent leakage which may impair your remote control.
The screen of the remote control starts functioning after inserting the batteries. UFO logo and flashing clock indicator starts
appearing on the screen.
Power mode indicator (mode1) starts functioning after pressing On / Off button.
V
See Fig 14 (P.
)
Power Mode Adjustment
Press/ buttons to adjust the power mode of your heater. Time settings are to be conducted for the rest of the functions
to operate.
Time Settings
Adjusting the time
Press Clock button.
Press/ buttons to set hour and minutes. Press Clock button to save your settings.
Press Cancel button to cancel time settings.
NOT: Repeated presses on the buttons will gear the speed of buttons and intervals with the presses will slow down the process.
On / Off Time
Warning! The time is to be set precisely and the heater is to be operating before using On / Off time function.
On Time Settings
Press Timer On button. Press
/
buttons to set hour and minutes. Press Timer On button to save your settings.
6.
Sleep
Swithes off the heater to stanby mode at a preset time.
7.
Everyday
Operates the heater on preset parameters everyday.
8.
Cancel
Cancels all settings.
9.
LCD (Liquid Cristal Display)
Displays the settings of the remote control and related
indicators.
ENGLISH
4
Advertisement
