Advertisement
Distinguished Customer,
This manual has been designed for our UFO Black Line models.
You have purchased a high quality, efficient and original UFO-IR Infrared Heater.
We would like to express our gratitude to you for your appropriate choice and confidence in UFO.
Please read this manual thoroughly in order to attain a sustainable satisfaction with your heater.
Please stick to the items in "Safety Instructions" section with strict observance.
Appropriate installation, operation and maintenance are of great importance for the security of you and of those who are to
benefit from the heater.
Please keep this Manual in a safe place for future reference and urgent needs.
We wish you to enjoy your new UFO Heater for better days and times...
All UFO brand products have
1. SAFETY
1.1 Safety Instructions (A + B)
A – Electrical Connection Safety
Check whether your appliance and power cord are damaged before operating your appliance.
Check whether there is any crack, disjoint or scratch on the filament (heating tube). If any, contact with your authorized technical
service.
If your appliance or power cord is damaged, do not operate your appliance and return it to your technical service.
Make sure that the main electricity circuit is 220-240V and 50-60Hz and the connection is fused.
Check the safety of the network. The fuse must be 16 A.
Do not use your UFO heater together with another appliance plugged to the same multiple sockets or connected to the same
fuse.
Use your appliance with a properly earthed plug.
The earthed plug must fall outside heating field and hot surface.
The device shall not be used below the power socket.
The power cord must not be left on or around the frame of your UFO appliance.
Unplug your appliance when you won't operate it for a long term or will conduct cleaning or maintenance.
If the device is assembled to spaces such as bathroom, care should be taken to assemble the device so that people having
shower cannot contact with the device and control buttons.
Group plugs cannot be used as distribution boxes due to overheating, fire protection and safe use.
I)
See Fig. 1-2 (P.
B – Safe distances required for installation, high temperature and fire protection
Never install your appliance on a combustible surface (plastics, nylon, carton etc.)
For wall mounting, there must be a 1,8 m ( 6 feet) distance from your appliance to the ground. For ceiling mounting, there must
be a 2,4 m ( 6 feet) distance from your appliance to the ground. See Fig. 8-a, 8-b (P.I)
For both horizantal and vertical mounting on the wall, there must be a min. distance of 0,4 m (1,5 feet) between the appliance
and the ceiling. See Fig. 8-a, 8-b and Table 1 (P.I)
The distance from your appliance from the corners should be; min. 0,4 m (1,5 feet) for vertical usage and min. 0,5 m (2 feet)
for horizantal usage. See Fig. 8 , Table 1 (P.I)
When installed to the ceiling, there must be a distance of 0,5 m between corners and the appliance.See Fig. 8-c (P.I)
The distance of your appliance from the living beings is to be min 1m. (3 feet)
ENGLISH
The distance from the front side of the heater to materials such as wood, carton, cloth etc., must be min 1 m. (3 feet)
Do not cover your appliance and do not hang any clothing over the heater or do not place any clothing on or near the appliance.
Do not stick anything into the protective grid.
Do not make use of your heater to light up cigarette or similar materials.
Supervision is needed when this product is used anywhere near children. The appliance is not intended for use by children or
other persons without assistance or supervision if their physical, sensory or mental capabilities prevent them from using it safely.
1
certificate.
www.ufotr.com
Center:
UFO Ifl›kla Is›tma Sistemleri San. ve Tic. Ltd. fit
Akçaburgaz Mah. 72. Sok. No:17 K:2
Esenyurt / ‹stanbul
Factory:
UFO Ifl›kla Is›tma Sistemleri San. ve Tic. Ltd. fit
Akçaburgaz Mah. 72. Sok. No:17
Esenyurt / ‹stanbul
Advertisement
