Advertisement
Cleaning
Attention! Regular and careful cleaning helps your UFO Heater operate for longer years and more efficiently.
1- Unplug your power cord for your safety before cleaning your appliance. Make sure that the power is off for your safety. Power
cord plug must be unplugged.
2- Outer surface of the device must be cleaned by a soft cloth or by a smooth brush. Soft cloth can be damp and a suitable
grease - dirt remover solution which will not cause scratches can be used. After the cleaning, it should be dried with a soft cloth
without leaving a trace.
3- If it is possible, clean the reflector and the filament with dry air externaly. If not, please consult to an UFO technical service
or to experts authorized by UFO.
8. Technical Service
Attention!
Only technical services and persons authorized by UFO may serve, repair and replace the spare parts of
this heater.
Points to be considered before shipping the product to the technical service:
1- Make sure that the plug, to which the appliance is connected, has power, check the fuse and power cord. If the plug lacks
power, consult to an electrician.
2- Make sure that the appliance has been installed in accordance with the instructions in the manual. If the installation is
inaccurate, consult to technical service.
8.1 Original Filament Definition
* Original filament (heating element or heating glass tube) bears UFO logo embossed on quartz glass using laser technology.
** Original filament (heating element or heating glass tube) bears markings indicating model and type of UFO filament as well
as serial number on the barcode plate.
*** Original spare parts should be used to ensure long life and efficient operation of the device.
**** Devices serviced using non-original spare parts are out of warranty.
Call the dealer to get service
ENGLISH
6
Advertisement
