Subscribe to Our Youtube Channel
Related Manuals for Wilson Electronics Mobile 4G SmarTech III 460108
Summary of Contents for Wilson Electronics Mobile 4G SmarTech III 460108
- Page 1 Mobile 4G ™ Cellular Signal Booster 460108 Need help? www.WilsonElectronics.com Tech Support 866-294-1660 Mon.- Fri. Hours: 7 am to 6 pm MST...
- Page 2 RISK TO THE VEHICLE. AGAIN, BE SURE TO PLACE YOUR SIGNAL BOOSTER IN A LOCATION WITH ADEQUATE VENTILATION AND AWAY FROM DIRECT SUNLIGHT OR MOISTURE. Installation Instructions for the Following Wilson Electronics Signal Boosters: Mobile 4G SmarTech Signal Booster ™...
-
Page 3: Package Contents
Package Contents Mobile 4G ™ Mini-Mag Slim Low Profile DC Power Supply Signal Booster Outside Antenna Inside Antenna 5V / 2.5A 301126 311127 859948 Optional Antennas 12” Mag Mount Marine Outside Antenna Outside Antenna Outside Antenna Trucker 311103 311104-5810 311130-5810 Outside Antenna 311101 Appearance of device and accessories may vary. - Page 4 • Connect the wire from the inside antenna to the port labeled “inside antenna” on the Signal Booster. Install the Low-Profile inside antenna. • Identify a place on the right side of the driver’s seat to mount the inside • Plug the power adapter into antenna.
-
Page 5: Troubleshooting
Each light indicates the operation of its Inside Antenna until the light is no longer labeled frequency. Take the following steps flashing red. Contact Wilson Electronics based on the indicator light color when Technical Support Team for assistance. using the Mobile 4G Signal Booster. - Page 6 • 10’ RG58 Cable Kit 311112-5810 • 800/1900 NMO Antenna • 10’ RG58 Cable Wilson Electronics manufactures a wide variety of antennas to help you customize your Signal Booster for your specific application. See your dealer or visit www.WilsonElectronics.com. Need help? www.WilsonElectronics.com Tech Support 866-294-1660 Mon.- Fri.
-
Page 7: Safety Guidelines
This device complies with Part 15 of FCC rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by Wilson Electronics could void the authority to operate this equipment. Need help? www.WilsonElectronics.com... - Page 8 Returned Material Authorization (RMA) number supplied by Wilson Electronics. Wilson Electronics shall, at its option, either repair or replace the product. Wilson Electronics will pay for delivery of the repaired or replaced product back to the original consumer if located within the continental U.S.
Need help?
Do you have a question about the Mobile 4G SmarTech III 460108 and is the answer not in the manual?
Questions and answers