Table of Contents
Advertisement
Linear Acoustic AERO.qc User Guide
play which is nice to look at but harder to use when calibrating low frequencies.
A typical value in the 20-50 region is useful for analyzing the frequency response
of an input signal, higher numbers for room calibration.
4.3
Monitoring Settings (Optional)
If the Monitoring option is installed, a separate set of inputs and outputs are available to
allow auditioning of the Main program audio and audio from eight external monitor inputs
arranged as 5.1+2 or 4 x stereo.
6
M ain Program
LtRt, LtRt2, LoRo
LtRt, LtRt2, LoRo
Monitor Inputs
These signals can all be downmixed to LtRt, LtRT2, or LoRo and can also then be upmixed
for compatibility testing, or downmixed to mono. These settings can be accessed via that
Monitoring Settings -> Adjust Preset menus, and up to six separate monitor configura-
tions can be stored and then recalled via the front panel or by GPI control.
M ain 5.1
M ain LtRt
M ain LtRt2
Main Downmix
M ain LoRo
Ext 5.1 5.1
Ext 5.1 LtRt
Ext 5.1 LtRt2
Ext. Downm ix
Ext 5.1 LoRo
Ext 1 (Lf/Rf)
Ext 2 (C/LFE)
Ext 3 (Ls/Rs)
Ext 4
Figure 4-6 Monitor Source Select
M onitor Source
Select
6
6
Full (6)
Mono
Upmix
31
Detailed Operation
M onitor
M ode
6
M onitor Output to
DAC and AES
Advertisement
Table of Contents
