Table of Contents
Advertisement
Linear Acoustic AERO.qc User Guide
•
•
•
•
•
•
•
•
•
•
Audio Inputs – Select the source for each of the ten processing core inputs:
•
In 1/2 = AES In 1/2 (SDI 1/2 - 15/16)
•
In 3/4 = AES In 3/4 (SDI 1/2 - 15/16)
•
In 5/6 = AES In 5/6 (SDI 1/2 - 15/16)
•
In 7/8 = AES In 7/8 (SDI 1/2 - 15/16)
•
In 9/10 = AES In 9/10 (SDI 1/2 - 15/16, Analog In))
SDI Outputs - Selects the source for each of the 16 possible audio channels for em-
bedding (first and last shown, defaults in bold)
•
Out 1/2 = AES 1/2 (AES 3-10, Enc A, Enc B, SDI 1/2 - 15/16, Mute)
•
...
•
Out 15/16 = SDI 15/16 (AES 3-10, Enc A, Enc B, SDI 1/2 - 15/16, Mute)
– Selects input for Dolby Digital/Dolby E decoder SIMM mod-
SIMM Source
ule. Allows selection of any AES or SDI input.
Test Tones – See below
Clock Source – Select between the following (must be 48kHz):
•
External Reference
•
AES Input 1
•
SDI
•
Internal 48kHz
Metadata (status) – Indicates presence or failure of input metadata (RS-485 or
VANC). Presence will be shown as the audio coding mode of the applied program (i.e.
3/2 or 2/0).
Metadata Source (RS-485/VANC) - Selects between RS-485 (serial 9-pin) metadata
or metadata extracted from the vertical ancillary VANC) space of an applied HD-SDI
signal.
VANC DID: - Sets the Data ID for metadata extraction. Default is 0x45.
VANC SDID: - Sets the secondary Data ID for metadata extraction. Default is 0x01.
VANC Extract Line - Sets the video line for metadata extraction. Default is Auto.
:
25
Detailed Operation
Advertisement
Table of Contents
