Table of Contents
Advertisement
Linear Acoustic AERO.one V3 User Guide
WARNING: It is always best to explicitly signal any upmixer when to upmix and
when not to upmix. Typically this would be via metadata or a contact closure. The
AutoMAX-II process is for situations where closures or metadata are not available.
4.5.8
Local Input Settings
•
Local Input - Manual control of Local Input
•
•
•
Loc Insert Type - Controls upmixer for Local Input:
•
•
•
Loc Upm Ctr Wdth - Controls Center Width of Local upmix
•
•
Loc Upm Sur Dpth - Controls Surround Depth of Local Upmix:
•
•
Loc LCR SumToLFE - Controls LFE creation for Local upmixer
•
•
Loc LCR Sum Lvl - Controls level of LFE creation for Local upmixer
•
4.5.9
Channel 7/8 & Downmix Setup
Downmix Type
The AERO.one unit produces a full-time downmix of the main program audio on the
channel 7/8 output. This downmix can be selected as stereo LoRo or surround compatible
stereo LtRt. Note that due to the required phase encoding, selection of LtRt will increase
the latency of the 7/8 output to 21 milliseconds.
Set On Now: Main program audio is replaced by Local Input audio
Set Off Now: Main program audio is NOT replaced by Local.
Upmix: Local audio is upmixed before replacing Main Program audio.
2-Channel: Local audio is passed as 2-channels, replacing only LfRf of Main.
33% = Default
100% = Default
Enable = Default
12% = Default
27
Detailed Operation
Advertisement
Table of Contents
