Table of Contents
Advertisement
Linear Acoustic AERO.qc User Guide
Chapter 8: Specifications
Sampling Rate
Output Delay
Upmixing Algorithms
Audio Word Length
Digital Audio In
Digital Audio Out
Metadata Input/Output
GPIO Port
Ethernet Port
Analog Monitor Output (OPTION)
Frequency Response
Distortion
Dynamic Range
Output Level
SDI
HD/SD-SDI I/O
Table 8-1 Electrical Specifications
48 kHz (±0.1%)
Main Out UPMAX Algorithm: 45 msec (fixed, all settings)
Main Out UPMAX-II: 60 msec (fixed, all settings)
Linear Acoustic UPMAX and UPMAX-II
24-bits
Four unbalanced female BNC connectors, comply with AES-
3ID-2001/SMPTE 276M. Internal 75-Ohm termination.
Four unbalanced female BNC connectors that comply with
AES-3ID-2001/SMPTE 276M specifications.
RS-485, 9-pin female D-connector on rear panel
TTL level, 25-pin female D-connector
RJ-45 female jack connector
20 Hz–20 kHz, ±0.5 dB
Less than 0.01% at 1 kHz
Less than 0.02%, 20 Hz–20 kHz
Greater than 85 dB
+4dBu @-20dBFS, +24dBu into 600 Ohms @0dBFS
Audio can be de-embedded (demuxed) from any of the four
groups and re-embedded (muxed) into any of four the groups.
Signals per SMPTE 299M-2004/292M-2004. Metadata can be
extracted from VANC per SMPTE 2020 A or B.
Supports 1080i/720P 50/59.94
53
Advertisement
Table of Contents
