Chapter 4: Detailed Operation; Menu Navigation; Mode Switches; Locked Main Screen (Left); Unlocked Main Screen (Right) - Linear Acoustic AERO.qc User Manual

Audio quality controller with optional hd/sd-sdi and dolby decoding

Table of Contents

Linear Acoustic AERO.qc User Guide

Chapter 4: Detailed Operation

This chapter discusses in detail the structure of the Linear Acoustic AERO.qc, how to use

the front panel LCD interface to access the menus, accessing and saving factory and user

processing presets, GPI and Metadata setup, and information about test tone generation

features of the unit. Definitions of the processing presets and individual adjustments are

covered in detail in Chapter 7.

4.1

Most of it is rather obvious, and a bit of experimentation will quickly make you comfort-

able navigating through the submenus. If in doubt, use the Left Arrow to back out towards

the Main menu. The menus and submenus are structured to access more complex func-

tionality as you go deeper into the hierarchy. See page 31 for a menu tree.

The left side of Figure 4-1 shows the main screen in Locked mode. Once unlocked, the top

level of the main screen looks like the right side of Figure 4-1. The meters show input, pro-

cessing, and output activity for the Main Inputs. The submenus to the right of the meters

are used to access the processor's functions, which are described in this chapter.

Figure 4-1 Locked Main Screen (left); Unlocked Main Screen (right)

4.1.1

Mode switches adjust parameters for features such as upmixing, bass enhancement, and

the CrowdControl option.

•

LfRf Upmix (On/Auto/Off) - When the unit is not under GPI control (System Op-

tions -> GPI Setup), this is a control allowing manual invoking of standard upmixing

and auto-upmixing. When the unit is under GPI control, this is an indication of the

current mode of the upmixer: On, Auto, or Off.

Table of Contents