Table of Contents
Advertisement
Linear Acoustic AERO.qc User Guide
•
Firmware Version
•
Host – Unit name (normally AQC260XXX where XXX are from the unit S/N)
•
IP Addr – 127.0.0.1 (dynamically allocated, so this will change IF connected), MAC
address is directly below the IP address.
•
CPU Usage – Normally around 40% but will move depending on processing
•
Buffer Size – The size of the audio buffer in samples.
•
Primary SR – Average Sample Rate, nominally 48 kHz
•
LfRf Upmix – Indicates whether upmixing is currently on or off
•
Metadata – Indicates current status of incoming metadata
•
Options - Displays installed options such as CN561 (Dolby encoder), SDI, etc...
4.1.3
System Options
The System Options menu provides the following functions:
•
Master Bypass – Relay bypass of Digital Inputs to Digital Outputs
•
Metadata Bypass – Relay bypass of metadata input to metadata output
•
I/O Options – General system audio and clock setup:
•
Figure 4-3 System Info menu
Extra Delay (Ch 1-2, 3-4, 5-6, 7-8, 9-10) - Allows up to 100 milliseconds of
additional delay to be added to each OUTPUT pair for plant timing purposes.
Default of 9 msec is equal to 33 msec of total input to output latency.
24
Detailed Operation
Advertisement
Table of Contents
