Vertical Pole Mounting - HIKVISION PanoVu 6A Series Quick Start Manual

Network PanoVu Camera·Quick Start Guide
Hook the safety rope on the camera to the cap.
1).
Hang the camera to the cap.
2).
Thread cables through cable gland and junction box cover.
3).
Connect the cables.
4).
Screw the cable gland back to junction box cover and screw
5).
the junction box cover back to camera.
Pull the camera upward to get it buckled into the cap.
6.
Tighten the fixing screws, two besides the open cap button and
7.
four around the camera base.
Install the decorative cover.
8.
Adjust surveillance angle. See Section 2.5.
9.

Vertical Pole Mounting

2.4
Vertical pole mounting brackets are not included in package. You
need to buy a wall mount and a vertical pole mount for this camera
if you adopt this mounting style.
Figure 2-12
Steps:
Install vertical pole mount to pole.
1.
Wall Mount and Vertical Pole Mount
20