Picture Of The Appliance; List Of Required Equipment For Maintenance & Repair; Check List For Each Intervention On The Appliances - Electrolux HSG Panini Service Manual

1-2 EXPLANATION OF THE APPLIANCE:
The appliance is a product specifi cally designed for Hot Sandwich
Outlets, with the following main characteristics:
• Great tasting, hot, toasted Sandwich in about less than 60"
(depending on the sandwich), in a one-step-solution;
• Combining the quality of latest Panini Grill technology with the
speed of Micro-Wave Technology;
• The HSG has been designed to be installed in many different
kinds of environment, even outside a real professional kitchen or
when the cooking activity is done in front of the customers (or at
least in the same room);

1-3 PICTURE OF THE APPLIANCE

2. List of required equipment for maintenance & repair
The following instruments and tools must be available for servicing
the appliance additionally to the regular equipment:
- MW leakage detector suitable for UL requirements (sensibility
0.1mW/cm2).=> 0D6887
- Multimeter => 0S0479
- Torx screw drivers sizes 18, 20 and 25.
- Surface contact temperature probe (min 300°C/572F).
In case of repair the following materials may be necessary:
- Conductive paste (for min 280 °C) => 049196 (100gr)
- Silicone RTV 102 color white. => 0D6886
- Silicone RTV 108 color transparent. => 0D1250

3.Check list for each intervention on the appliances

Important!
Appliance installation and any maintenance work
must be carried out only by specialized personnel
authorized by the manufacturer. Microwave lea-
kage must be checked every time you do service
to the machine.
For the safe and effi cient use of the appliance it is recommended
to check at each intervention the following issues.
- General integrity and cleanliness of the appliance
- Microwave leakage
- Right Functioning of the appliance
The following check list can be used also as guideline for every
preventive maintenance. Please refer to the after sales dealer
policy for more information.
HSPP tech GB 03 09
- Acetona.
- Glue: Loctite (Strong version).
- Test load for MW leakage: 1 quart/1 liter of tap water in a high
temperature and MW proof container . (Note the height of the
container cannot be more than 3"/75mm).
- Specifi c Glass cutting device. => 0D6888
- Cutter.
- Tool for smoothening a silicon rod.
- Positioning Jig ( only on demand for Authorized Repair Centres).
General integrity and cleanliness
Unplug the appliance!
Verify that the machine is cooled down!
As in any Microwave appliance, it can occur to have sparks inside
the cooking chamber. These sparks do not infl uence the safety
of the user nor the safety of the appliance nor the quality of the
food. If, as a consequence of the sparking, a dark mark on the
metal parts is visible, this can be cleaned with a damp cloth.
If it is necessary to train the user on the cleaning, refer to the
cleaning instructions on pages 3 and 4 and chapter 5 in this
handbook.
a) Check the location (see installation diagram in page 15)
- Distances to other machines, walls and combustible parts
- Obstacles for the opening and closing action
- Obstacles on vent holes of the appliance
- Overall cleanliness of the surroundings of the appliance
- Check the used tools for cleaning . If not OK, advise the
user.
4/38