Electrolux HSG Panini Service Manual page 24

Table of Contents

Advertisement

Problem
Abnormal noise
No
The machine goes in prehea-
ting/cooling frequently
No
Automatic lid opening doesn't
work properly
No
Error 4 or 5 is indicated, but
the Panino reaches the desired
core temperature
HSPP tech GB 03 09
Yes
Noise during opening/closing
the lid
Noise permanent when ma-
chine is on
Yes
the phenomenon raises after a
stdby mode or switching on of
the machine
the phenomenon raises sud-
dently during operation
the unit also displays err3
Yes
lid doesn't arrive or stay in full
open position
lid opens too fast
Check if ...
louvers are not clogged or
deformed
Yes: Check ...
lid springs don't make noise in
movement
transformer fan is free rotating
magnetron fans are free rotating remove the obstacles, readjust the po-
Yes: Check ...
the the stdby parameter is ac-
cording customer expectation
there is enough free clearance
on the lateral sides for the coo-
ling airfl ow
there is an air sucktion fl ow on
the right lateral side
the fan is working
there is enough free clearance
on the lateral sides for the coo-
ling airfl ow
there is an air sucktion fl ow on
the right lateral side
Yes: Check ...
the lid has a free movement
springs are both in place and
not broken and well adjusted
gas spring is in place
spring support is not broken
axis is not broken and not
deformed
tube is not broken and not
deformed
the bushings are not broken
and are in place
screws of the tube axis are tighted
springs are both well adjusted
the amperometric transformer is
working by measuring the Voltage
on connector TM (approx. 3V)
20/38
If not, action to do
clean or change the part if
necessary
put some grease or cooking oil
remove the obstacles, readjust
the position of the fan or replace
it if broken
sition of the fan or replace it if broken
adjust it
give the clearance according to
the installation diagram
clean the louvers
reconnect the wires of the fan or
replace the fan
give the clearance according to
the installation diagram
clean the louvers
remove the obstacle
adjust or replace them
adjust or replace it
replace it
replace it
replace it
adjust or replace it
tighten them
adjust them by having a pretension
enough to lift the lid of 19cm on the
front without the gas spring working
replace it

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents