Kenmore 665.17159K214 Use & Care Manual page 13

Rinse Aid Setting
Your rinse aid dispenser is adjustable. For most water conditions,
the factory setting will give good results. If you have hard water
and notice calcium buildup on your dishware, you may want to
try a higher setting. If you notice foam in your dishwasher, use a
lower setting.
Lock
To Adjust the Setting
1. Turn the knob to the REFILL position and remove.
2. Turn the arrow inside the dispenser to the desired setting.
3. Replace the knob and turn to the LOCI< position.
Refill
LOADING
1' Angle clirtiest dish surfacesclownwordond use the slotsin
spaCe for water to flow up through each rack and to keep items separated'
between
dishware'
Separated
Separating allows water flow,
Ang!/ed surfaces
13