Virtual Servers - iBall Baton iB-WRT300N User Manual

3.12.1 Virtual Servers

Choose menu "Forwarding" → "Virtual Servers", and then you can view and add virtual servers
in the next screen (shown in Figure 3-60). Virtual servers can be used for setting up public
services on your LAN. A virtual server is defined as a service port, and all requests from Internet
to this service port will be redirected to the computer specified by the server IP. Any PC that was
used for a virtual server must have a static or reserved IP address because its IP address may
change when using the DHCP function.
Service Port: The numbers of External Service Ports. You can enter a service port or a

range of service ports (the format is XXX – YYY; XXX is the Start port and YYY is the End
port).
IP Address: The IP address of the PC running the service application.

Protocol: The protocol used for this application, either TCP, UDP, or All (all protocols

supported by the router).
Status: The status of this entry, "Enabled" means the virtual server entry is enabled.

Edit: To modify or delete an existing entry.

To setup a virtual server entry:
1. Click the Add New button. (pop-up Figure 3-61)
2. Select the service you want to use from the Common Service Port list. If the Common
Service Port menu does not list the service that you want to use, enter the number of the
service port or service port range in the Service Port field.
3. Select the service you want to use from the Use Interface list.
4. Enter the IP address of the computer running the service application in the IP Address field.
5. Select the protocol used for this application in the Protocol drop-down list, either TCP, UDP,
or All.
Select the Enabled option in the Status drop-down list.
6.
Click the Save button.
iB-WRT300N 300M MIMO Triple Smart Router
Figure 3-60
69