Start IPv6 Address: Enter a value for the DHCPv6 server to start with when issuing IPv6
•
addresses.
End IPv6 Address: Enter a value for the DHCPv6 server to end with when issuing IPv6
•
addresses.
Leased Time: The Leased Time is the amount of time in which a network user will be
•
allowed connection to the router with their current dynamic IPv6 address. Enter the
amount of time, in hours, then the user will be "leased" this dynamic IPv6 address. After
the dynamic IPv6 address has expired, the user will be automatically assigned a new
dynamic IPv6 address. The default is 86400 seconds.
Site Prefix Configuration Type: Select a type to assign prefix to IPv6 addresses. Delegated
and Static are provided.
1)
If Delegated is selected, please complete the following parameters.
Prefix Delegated WAN Connection: Select a WAN connection form the drop-down list
•
to assign prefix.
2)
If Static is selected, please complete the following parameters.
Site Prefix: Enter a value for the site prefix.
•
Site Prefix Length: Enter a value for the site prefix length.
•
Click the Save button to save the settings.
3.5.6
MAC Clone
Choose menu "Advanced Setup""MAC Clone", you can configure the MAC address of the
WAN Interface as shown below.
iB-WRT300N
300M MIMO Triple Smart Router
Figure 3-21
Figure 3-22
Figure 3-23
37