Static Route - iBall Baton iB-WRT300N User Manual

Click the Add Interface button, you can add WAN Interfaces.
Click the Save button to save your settings.

3.11.2 Static Route

Choose "Route Settings" "Static Route". You can see the Static Route screen, this screen
allows you to configure the static routes (shown in Figure 3-55). A static route is a pre-determined
path that network information must travel to reach a specific host or network.
To add static routing entries:
Click the Add New button in Figure 3-55, and you will see the screen as shown in Figure
1.
3-56.
2. Enter the following data:
Destination IP Address: The Destination IP Address is the address of the network or host

that you want to assign to a static route.
Subnet Mask: The Subnet Mask determines which portion of an IP Address is the network

iB-WRT300N 300M MIMO Triple Smart Router
Figure 3-54
Figure 3-55
Figure 3-56
66