Basic Settings - iBall Baton iB-WRT300N User Manual

3.8.1

Basic Settings

Choose "Wireless""Basic Settings", you will see the screen of Wireless Basic Settings shown
as below. The basic settings for wireless networking are set on this screen.
This page allows you to configure basic features of the wireless LAN interface. You can enable or
disable the wireless LAN interface, hide the network from active scans, set the wireless network
name (also known as SSID) and restrict the channel set based on Region requirements.
:
 SSID (1-3) Up to four SSIDs for each BSS (Basic Service Set) can be entered in the filed
SSID1 ~ SSID3. The name can be up to 32 characters. The same name (SSID) must be
assigned to all wireless devices in your network. Check the Enable box to enable the desired
SSID. The wireless stations connected to different SSIDs can not communicate with each
other.
Region: Select your region from the pull-down list. This field specifies the region where the

wireless function of the Router can be used. It may be illegal to use the wireless function of
the Router in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
iB-WRT300N 300M MIMO Triple Smart Router
Figure 3-35
46