Guest Wi-Fi Status - iBall Baton iB-WRT300N User Manual

You can enable or disable Guest Network. When you enable this function, you could set wireless
parameters for Guest Network.
SSID: The guest network name. When setting up a Guest network, it is strongly

recommended to use a name that easily distinguishes it from your primary network. The
default name is Wireless_Guestxx (xx is the last two numbers of MAC address).
Security: The default value is disabled, but it's strongly recommended to enable

WPA/WPA2-Personal. WPA/WPA2-Personal is the WPA/WPA2 authentication type based
on pre-shared passphrase.
Authentication Type: Select the Authentication Type from the drop-down list, the default

method is Auto, and you can leave it as a default setting.
Encryption: You can select either Auto, or TKIP or AES.

Wireless Password: You can enter ASCII characters between 8 and 63 characters or 8 to 64

Hexadecimal characters.
Group Key Update Period: Specify the group key update interval in seconds. The value

should be 30 or above. Enter 0 to disable the update.
Allow Guests to access my Local Network: The guests have access to your Local

Network, but can not login the router's web management interface.
Allow Guests to access my USB Storage Sharing: The guests can access the specified

files on the USB storage device via the function of USB Storage Sharing, but the function of
FTP Server, Media Server are not available in Guest Network. For more details please refer
to 3.10.3 Storage
Guest Network Isolation: This function can isolate wireless clients on your guest network

from each other. Client isolation is disabled by default.
Guest Network Bandwidth Control: With this function, you can configure the Upstream

Bandwidth and Downstream Bandwidth for guest network.
Click Save to save your settings.
3.9.2

Guest Wi-Fi Status

Choose menu "Guest Network""Guest Wi-Fi Status", you can see the MAC Address, Current
Status, Received Packets and Sent Packets for each connected wireless station.
MAC Address: The connected wireless station's MAC address.

Current Status: The connected wireless station's running status.

Received Packets: Packets received by the station.

Sent Packets: Packets sent by the station.

You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click on the Refresh button.
Sharing.
iB-WRT300N 300M MIMO Triple Smart Router
58