Wireless Mac Filtering - iBall Baton iB-WRT300N User Manual

3.8.5

Wireless MAC Filtering

Choose menu "Wireless"  "MAC Filtering", you can control the wireless access by configuring
the Wireless MAC Filtering function, shown in Figure 3-41.
To filter wireless users by MAC Address, click Enable. The default setting is Disabled.
MAC Address: The wireless station's MAC address that you want to filter.

Status: The status of this entry, either Enabled or Disabled.

Host：Here displays the host selected from the drop-down list.

Description: A simple description of the wireless station.

To Add a Wireless MAC Address filtering entry, click the Add New button. The following page will
appear, shown in Figure 3-42:
To add or modify a MAC Address Filtering entry, follow these instructions:
1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC
Address is XX:XX:XX:XX:XX:XX
00:1E:A6:11:22:33.
2. Give a simple description for the wireless station in the Description field. For example:
Wireless station A.
3. Select your host from the drop-down list.
4. Select Enabled or Disabled for this entry on the Status drop-down list.
Click the Save button to save this entry.
5.
To edit or delete an existing entry:
iB-WRT300N 300M MIMO Triple Smart Router
Figure 3-41
Figure 3-42
(X is any hexadecimal
54
digit). For example: