Restart; Statistics - iBall Baton iB-WRT300N User Manual


Note:
1) New firmware versions are posted at and can be downloaded for free. There is no need to
upgrade the firmware unless the new firmware has a new feature you want to use. However,
when experiencing problems caused by the router rather than the configuration, you can try to
upgrade the firmware.
2) When you upgrade the router's firmware, you may lose its current configurations, so before
upgrading the firmware please write down some of your customized settings to avoid losing
important settings.
3) Do not turn off the router or press the Reset button while the firmware is being upgraded. Loss
of power during the upgrade could damage the router.
4) The firmware version must correspond to the hardware.
5) The upgrade process takes a few moments and the router restarts automatically when the
upgrade is complete.

3.21.9 Restart

Choose menu "System Tools" → "Restart", and then you can click the Restart button to restart
the router via the next screen.
Some settings of the router will take effect only after rebooting, which include
Change the LAN IP Address (system will reboot automatically).
•
• Change the DHCP Settings.
Change the Wireless configurations.
•
• Change the Web Management Port.
Upgrade the firmware of the router (system will reboot automatically).
•
• Restore the router's settings to factory defaults (system will reboot automatically).
Update the configuration with the file (system will reboot automatically.
•

3.21.10 Statistics

Choose menu "System Tools" → "Statistics", and then you can view the statistics of the router,
including total traffic and current traffic of the last Packets Statistic Interval.
iB-WRT300N 300M MIMO Triple Smart Router
Figure 3-106
98