Before Installing - Provision ISR Ultra-Z-18s User Manual

Before installing

Installation should be carried out only by qualified personnel and in accordance with
·
!
any wiring regulations in force at the time.
The speed dome is heavy and could cause injury if not correctly mounted in
·
accordance with these instructions. Use only the fittings supplied with the speed
dome and ensure that all lanyard safety cables are connected correctly during
installation.
Adequate protection against lightning strikes and power surges must be installed to
·
prevent damage to the speed dome.
Any safety warnings on the product and in these instructions must be adhered to.
·
If cleaning is necessary, disconnect power to the speed dome first. Do not use
·
abrasive cleaners, as these will cause damage to the cover and cause poor image
quality. Use a damp cloth to gently clean the dome cover and dry off with a soft
clean cloth.
Do not use any brackets, mounts or other accessories not specifically designed for
·
use with this speed dome.
Do not attempt to service or repair the speed dome as opening or removing covers
may expose dangerous voltages or other hazards. Refer all servicing to qualified
service personnel.
1