DCS RGU-366 User Manual page 15

To insert the shelves - SECONDARY OVEN (48" models only)
Guard rail
Make sure the guard rail is at the back,
1
facing up.
Safety stop
Tilt the front up slightly to help the safety
3
stops clear the side rack wires.
To remove the shelves
Wait for the oven to cool down completely.
1
Pull the shelf forward about ¾ of the way.
2
Tilt the front up slightly to help the safety stops clear the side rack wires.
3
Remove the shelf.
4
Side rack wire
Position the shelf: it should rest on the side
2
rack wires, as shown.
Lower the shelf back onto the side rack
4
wires and slide all the way into the oven.
Oven use
13
US
CA